Home › Rainwater Tanks and Pumps Yarragon
Tanks and pumps · Yarragon VIC 3823

Rainwater Tanks and Pumps Yarragon

Tank water is the main supply on many properties around Yarragon. We plumb new tanks, fix and replace pressure pumps and keep tank water flowing clean to the house. Call 03 8658 7871.

Prefer email? info@yarragonplumbing.com.au

  • Local to Yarragon
  • Licensed and insured
  • Quote before work
  • Same-day where we can
Plumber servicing a pressure pump beside a concrete rainwater tank on a farm block

Tank water around Yarragon

Head up into the hills towards Yarragon South, or out along the back roads towards Shady Creek and Allambee, and you will find plenty of homes that rely entirely on rainwater. Others use tank water for gardens, toilets and laundries while drinking town water. Both setups need plumbing that is reliable, safe and easy to maintain.

What we do

  • connecting new concrete, poly and steel tanks to roofs and houses
  • installing, repairing and replacing pressure pumps
  • fitting pressure tanks to reduce pump cycling
  • first-flush diverters and leaf screens to keep debris out
  • filters and UV systems for drinking water
  • tank overflow connections to stormwater
  • rain-to-mains switching valves for properties with both supplies
  • backflow protection where tank and mains water are connected
  • finding and fixing leaks in tank outlets and supply lines

Pressure pumps

The pump is the heart of a tank water system, and it is the part most likely to give trouble. Common problems include:

  • Pump runs but no water comes out: the pump has lost prime, the tank is empty, or there is an air leak on the suction side.
  • Pump keeps cycling on and off: a leak somewhere in the house or service, a failed pressure tank, or a faulty pressure switch.
  • Pump will not start: a tripped power supply, a failed capacitor or motor, or a faulty controller.
  • Low pressure at the taps: a clogged filter, a worn pump, or undersized pipework.
  • Noisy pump: worn bearings, cavitation or a loose mounting.

We diagnose the fault, repair what can be repaired and replace what cannot. When a pump needs replacing, we choose one sized for your household and the distance and height the water has to travel. A pump that is too small struggles, and one that is too big wears out faster and wastes power.

Protecting the pump

A small roof or cover keeps rain and sun off the pump and extends its life. A pressure tank reduces how often the pump starts. A suction strainer keeps debris out. And if you run the tank dry, the pump can overheat, so a dry-run protection device is worth considering.

Keeping tank water clean

Rainwater is generally good water, but what goes into the tank matters. Leaves, bird droppings, dust and the odd possum can all end up in there. We recommend:

  • leaf guards on gutters and screens on tank inlets
  • a first-flush diverter that sends the first dirty water from each rain away from the tank
  • a sediment filter after the pump
  • for drinking water, a fine filter and possibly a UV steriliser
  • cleaning out sludge from the tank every few years

If your tank water smells, tastes odd or looks cloudy, stop drinking it and get it checked.

Rain-to-mains switching

On properties with both tank and town water, a switching device can automatically change over to mains water when the tank runs low. This keeps toilets and laundry running without interruption. These systems need proper backflow protection so tank water cannot flow back into the town supply. We install and service them to meet Gippsland Water's requirements.

New tank installations

When you install a new tank, the plumbing is as important as the tank itself. We work out the best position, connect the downpipes, fit the overflow to the stormwater system, install the outlet and connect the pump. On a slab or a compacted base, the tank sits level and stable. We make sure everything is accessible for maintenance.

Dry spells

Gippsland is known for rain, but summers can still empty tanks. If your tank runs dry, turn off the pump to protect it. Water carters can refill the tank. Once it is refilled, the pump may need to be re-primed, which we can do or talk you through.

Book tank and pump work

Ring 03 8658 7871 or send the form. Tell us the size and type of your tank and the make of your pump if you know it.

A typical tank call

A retired couple on a hill block near Yarragon South ring because their pump has started running every few minutes overnight, even with every tap turned off. We check the house for leaks first: no running toilets, no dripping taps. Then we walk the poly line from the pump to the house and find a soft wet patch in the lawn where the line runs under an old fence. A fence post had been driven right next to the pipe years ago and it has finally rubbed through.

We dig it up, replace the damaged section, run the line a little further from the fence and pressure test it. The pump stops short cycling, and the couple stop losing water they cannot easily replace in summer. While we are there we also replace the perished pressure tank bladder, which was making the pump start more often than it needed to.

Tanks and bushfire planning

Many properties in the hills around Yarragon keep a dedicated water supply for firefighting. If you are planning a firefighting tank, the outlet fitting, valve and pipework need to suit the CFA's requirements and be accessible to a fire truck. We can plumb a fire tank outlet and separate it from the household supply, so a summer of household use does not leave the fire supply empty.

Free quote

Tell us about the job

Tell us what is happening and a licensed Yarragon plumber will ring you back. If water is pouring out or you can smell gas, call 03 8658 7871 instead.

03 8658 7871

We quote every job individually. We do not publish price lists, because the right answer depends on what we find.







    Questions

    Rainwater Tanks and Pumps: common questions

    Why does my tank pump keep turning on and off?

    Short cycling usually means a small leak somewhere in the system, a failed pressure tank or a faulty pressure switch. Turn off all taps and listen: if the pump still cycles, there is likely a leak. We trace the cause and fix it.

    How do I re-prime a tank pump?

    Turn off the power, open the priming plug, fill the pump housing with water and replace the plug, then turn the power back on and open a tap. If the pump will not hold prime, there is probably an air leak in the suction line. We can find it.

    Is rainwater safe to drink?

    Rainwater can be safe to drink if the roof, gutters and tank are clean and well maintained, with first-flush diversion and appropriate filtration. If the water smells, tastes odd or looks cloudy, stop drinking it and have it checked.

    Do I need backflow protection with a tank and mains water?

    Yes. Where tank and mains water are connected through a switching device or plumbing, backflow protection is required so tank water cannot enter the town supply. We install and test the right device.

    Every job

    What comes with rainwater tanks and pumps from us

    Tools on the ute
    Drain camera and locator, electric drain machine, high-pressure jetter, thermal camera, acoustic leak gear, gas detector and pressure test kits
    Licences
    Victorian plumbing licences covering water supply, sanitary, drainage, roofing and gasfitting work
    Pricing
    A clear price agreed before work starts, and written quotes for bigger jobs. No call-centre surprises
    Materials
    WaterMark-certified products and fittings to Australian Standards
    Paperwork
    Compliance certificates lodged for regulated work, photos and notes for insurance where useful
    Clean-up
    Old parts taken away, floors and paths cleaned, the job tested with you before we go
    Why locals ring us

    Plain dealing, careful work

    A plumber who knows the town

    Weatherboards from the early 1900s, 1970s brick veneers, new homes on the edge of town and farmhouses on tank water: that is the mix we work on around Yarragon every week.

    A price before the work

    No surprises. The plumber diagnoses first and agrees the job and the price with you before picking up a tool.

    Find it, then fix it

    Drain cameras, thermal imaging and acoustic gear show us where the problem really is, so we are not digging up your yard on a guess.

    Licensed for the lot

    Water, sanitary, drainage, roofing and gasfitting work done by licensed plumbers, with compliance certificates where they are required.

    Service area

    Towns we cover from Yarragon

    We are based in Yarragon and work the Princes Highway towns either side, the hill country to the south and the farms out towards Shady Creek. If your place is not listed, ring 03 8658 7871 and ask.

    Need a plumber in Yarragon today?

    Talk to a licensed plumber, not a call centre. Quote first, then the work.