Plumbing questions, answered for Yarragon homes
Straight answers to the questions people search for most. Still stuck? Ring 03 8658 7871.
Prefer email? info@yarragonplumbing.com.au
- Local to Yarragon
- Licensed and insured
- Quote before work
- Same-day where we can
How we answer cost questions
Many of the questions people ask online are about cost. We do not publish prices or hourly rates, because plumbing jobs vary too much for a website figure to be useful or honest. What we do instead is diagnose the problem, explain it and give you a firm price before any work starts. The answers below explain what affects the cost of each type of job, so you know what to expect when you ring.
Questions locals ask us
How much for a plumber for 3 hours?
Three hours can mean very different jobs, so we do not price by a block of time online. We assess the job and give you a price for the work itself before we start.
How much is a plumber per hour in Australia?
Hourly rates vary by business, region and time of day, and many plumbers price by the job instead. We give you a fixed price for the job after we have looked at it.
How to find the best plumbers?
Choose a licensed, insured, local plumber who answers the phone, explains the problem clearly, gives you a price before starting and lodges a compliance certificate when required.
How much do plumbers charge per hour in Australia?
It varies widely across the country. Rather than an hourly guess, we quote the job once we know what it involves, so you are not watching the clock.
How much does a plumber charge per hour in Australia?
Rates depend on the business, the location, the time of day and the work. We quote per job after diagnosis, so the price you agree to is the price you pay for that work.
What is the aussie nickname for plumbers?
Plumbo is the usual one. You might also hear dunny diver from the old-timers.
Which country is best for plumbers?
Plumbers are in demand in many countries, and Australia is one of them, with strong licensing standards and regional towns like Yarragon always needing good tradespeople.
What do plumbers charge per hour in Australia?
There is no single answer, as rates differ between businesses and regions. We focus on giving you a clear price for the job before we start.
Why would you need an emergency plumber?
For burst pipes, sewage overflows, gas smells, leaking hot water units near power or a complete loss of water. These can cause damage or put people at risk if left.
What is the Australian slang for a plumber?
Plumbo. Some people say dunny diver, usually with a grin.
Who is responsible for blocked sewer drains in Australia?
Generally the water authority looks after the sewer mains and the property owner looks after the drains on their land. In Yarragon the authority is Gippsland Water.
What acid do plumbers use to unclog drains in Australia?
Good plumbers rarely rely on acid. We use electric drain machines and high-pressure jetters, then check the pipe with a camera. Strong chemicals can damage old pipes and are dangerous to handle.
How to clear blocked sewer pipe?
A blocked main sewer needs an electric drain machine or a jetter, followed by a camera inspection to find the cause. Stop using water and ring a plumber if sewage is backing up.
What is the legal temperature for hot water in Australia?
New and replaced systems generally deliver water to bathrooms at no more than 50 degrees Celsius, while stored water is kept at 60 degrees or more to control bacteria.
Why do plumbers not recommend tankless water heaters?
They suit many homes but need adequate gas supply and steady water flow. We check your gas supply, pipework and how you use hot water before recommending one.
Why is my hot water not coming out hot enough?
Common causes are a worn tempering valve, a failed element or thermostat, a gas burner or pilot fault, sediment in the tank or a solar booster that is not working.
Is a gas plumber the same as a plumber?
Not necessarily. Gasfitting is a separate licence in Victoria. A plumber needs a gasfitting licence to do gas work, and ours have one.
Can a plumber deal with gas?
Yes, if they hold a gasfitting licence. Always ask to see it before anyone works on your gas.
Do plumbers fix gas?
Licensed gasfitters fix gas leaks, service heaters and hot water units, connect cooktops and set up LPG bottles, then pressure test everything before turning the gas back on.
How much does it cost for a plumber to replace a leaking tap?
It depends on the tap type and the parts needed. We inspect the tap and give you a price before starting the repair.
How much will a plumber charge to fix a leaking tap?
A washer change and a worn seat or cartridge are different jobs. We quote once we have looked at the tap.
How do I fix a tap that is leaking from the top?
A leak around the handle or spindle usually means worn o-rings or gland packing. Turn off the water, remove the handle and replace them, or ask us to do it.
Who is responsible for a burst water pipe?
Generally the water authority is responsible up to and including the meter, and the owner is responsible for pipes on the house side of the meter.
Who do you call when a water pipe bursts?
Turn the water off at the meter, then call a licensed plumber. In Yarragon ring 03 8658 7871. For bursts in the street, call Gippsland Water.
How do I report a water leak to Yarra Valley water?
Yarra Valley Water covers parts of Melbourne, not Yarragon. In Yarragon, report leaks in the street or at the meter to Gippsland Water.
How much to replace a burst water pipe?
It depends on where the pipe is, what it is made of and how easy it is to reach. We find the burst and give you a price before repairing it.
How much do plumbers charge to fit a new toilet?
It depends on the toilet, the set-out, the floor and pipework condition. We measure up and give you a price before starting.
What are the three common faults in a cistern toilet?
A worn inlet valve, a worn outlet valve seal and a faulty flush button or linkage.
How much does it cost to fix a leaking toilet at the base?
It depends on whether it is a failed seal, a cracked pan or floor damage. We find the cause and quote the repair.
How much does it cost to replace a toilet in Australia?
It depends on the toilet you choose and the installation work. We give you a quote after checking the setup.
How much do hot water systems cost to replace?
It depends on the type and size, the fuel and the installation work needed. We visit and give you a written quote.
How much does Bunnings charge to install a hot water system?
We cannot speak for other businesses. Whoever you use, make sure the installer is licensed, fits the correct valves and lodges a compliance certificate.
What is the life expectancy of a hot water system?
Storage tanks often last around ten years, sometimes longer with anode checks. Heat pumps and continuous flow units can last longer with servicing.
What is the minimum hourly rate for a plumber?
There is no set minimum across the industry. We quote by the job so you know the full price before work starts.
What plumbers won't tell you?
That many problems can be repaired rather than replaced, and that simple habits like keeping wipes and fat out of drains prevent most blockages. We will tell you both.
Tell us about the job
Tell us what is happening and a licensed Yarragon plumber will ring you back. If water is pouring out or you can smell gas, call 03 8658 7871 instead.
We quote every job individually. We do not publish price lists, because the right answer depends on what we find.
Need a plumber in Yarragon today?
Talk to a licensed plumber, not a call centre. Quote first, then the work.