Home › Hot Water Replacement Yarragon
Hot water replacement · Yarragon VIC 3823

Hot Water Replacement Yarragon

When a tank has rusted through or an old heater is costing too much to run, we help you choose the right replacement, install it properly and cart the old one away. Ring 03 8658 7871 for a quote.

Prefer email? info@yarragonplumbing.com.au

  • Local to Yarragon
  • Licensed and insured
  • Quote before work
  • Same-day where we can
Plumber tightening the inlet valve on a new heat pump hot water system, old cylinder on a trolley

When it is time to replace

Not every hot water fault means a new unit. We check for a repair first. But replacement is usually the right call when:

  • the tank is leaking from the body or the base, which means it has corroded through
  • the unit is well past its expected life and starting to fail in different ways
  • parts for an older model are no longer made
  • the repair would cost a large share of a new system
  • the household has grown and the system cannot keep up
  • running costs are higher than they need to be and you want a more efficient type

If your unit is still working but getting old, it can be worth planning a replacement before it fails. That gives you time to choose, rather than taking whatever is available on a cold morning.

Choosing the right system

There is no single best hot water system. The right one depends on your house, your household and what fuel you have. We look at:

  • How many people live there and when they use hot water. A family with teenagers who shower in the morning needs a different setup to a retired couple.
  • What fuel is available. Natural gas in town, LPG on rural blocks, mains power everywhere, and roof space and sun for solar.
  • Where the unit can go. Some homes have the old unit in a cramped laundry cupboard. Heat pumps need airflow, and gas units need flue clearances.
  • Running costs. Heat pumps and solar can be much cheaper to run than older electric storage units, while gas costs depend on whether you are on natural gas or LPG.
  • Rebates. Some efficient systems are eligible for government rebates. We can point you to the current programs, though eligibility is up to you and the program rules.

Like for like

Replacing a unit with the same type is usually the simplest and quickest option. The existing pipework, power or gas supply and position can usually be reused with minor changes.

Switching type

Moving from electric storage to a heat pump, or from gas storage to continuous flow, can cut running costs but may need extra work, such as a new power circuit, a bigger gas line or a new position for the unit. We explain what is involved and include it in the quote so there are no surprises.

Heat pumps in a Gippsland climate

Heat pumps pull warmth from the air, which makes them very efficient. People sometimes worry they will not work in cold weather. Modern units are designed to keep working on frosty mornings, though they work hardest when it is cold. Choosing a model rated for cooler climates, and installing it where it gets some sun and airflow, makes a real difference. They also make a low hum while running, so we think about where the unit sits in relation to bedrooms and neighbours.

Rural properties

On tank water, the hot water system needs to cope with variable pressure and sometimes with sediment from the tank. We look at the pump and filtration as part of the job. LPG users considering continuous flow units should know that these units use gas only when hot water is running, which can suit some households, but the bottles need to be able to supply enough gas for the unit's peak demand.

What a replacement involves

  1. Site visit and quote. We look at the existing unit, the pipework, gas or power supply and the space, talk about your needs and give you a written quote.
  2. Installation day. We drain and disconnect the old unit, install the new one on a proper base, connect the water, gas or power, fit the required valves including a tempering valve, and commission the system.
  3. Testing. We check for leaks, test the relief valve and tempering valve, check temperatures and show you how the system works.
  4. Paperwork. We lodge the compliance certificate and give you the warranty information.
  5. Clean-up. The old unit goes on the ute and is taken away for recycling where possible.

Most straightforward replacements are done in a few hours. Changing type can take longer.

Valves that matter

A good installation is more than the unit. We fit:

  • a tempering valve to limit bathroom hot water to a safe temperature
  • a pressure limiting valve where mains pressure is high, which protects the unit and your pipes
  • a non-return valve and isolation valves so the unit can be serviced easily
  • a relief valve drain that discharges somewhere safe

Skipping these is how cheap installations become expensive problems later.

Looking after your new unit

To get the most out of a new system, have the relief valve checked periodically, and on storage units have the anode inspected every few years. If you are on tank water, keep the filters clean. We can set a reminder for your service if you would like.

Get a replacement quote

Ring 03 8658 7871 or send the form. A photo of the existing unit, its label and the space around it helps us give you an accurate quote faster.

Planning ahead saves money

Hot water units nearly always fail at an awkward time. If your unit is getting on and showing signs of age, such as rust stains near the base, a relief valve that drips constantly or water that is not as hot as it used to be, it is worth getting a replacement quote now. You can then choose the system you actually want, check rebates and book the installation for a convenient day, instead of making a rushed decision with no hot water.

Free quote

Tell us about the job

Tell us what is happening and a licensed Yarragon plumber will ring you back. If water is pouring out or you can smell gas, call 03 8658 7871 instead.

03 8658 7871

We quote every job individually. We do not publish price lists, because the right answer depends on what we find.







    Questions

    Hot Water Replacement: common questions

    How much do hot water systems cost to replace?

    It depends on the type and size of the system, the fuel, where it is installed and how much extra work is needed, such as new pipework or power. We do not publish prices. We visit, check the setup and give you a written quote before any work starts.

    How much does Bunnings charge to install a hot water system?

    We cannot speak for other businesses' pricing. Whoever installs your system, make sure a licensed plumber or gasfitter does the work, the correct valves are fitted and a compliance certificate is lodged. We give a written quote that includes everything needed for a compliant installation.

    What is the life expectancy of a hot water system?

    It varies with the type of unit, water quality and maintenance. Storage tanks often last somewhere around ten years, sometimes more with regular anode checks. Continuous flow and heat pump units can last longer with servicing. Leaks from the tank body usually mean the end of its life.

    Why do plumbers not recommend tankless water heaters?

    Many plumbers do recommend them for the right home. They need a good gas supply and steady water flow, and they may not suit every pipework layout or household. We check those things before recommending one.

    Can you remove my old hot water unit?

    Yes. We drain, disconnect and remove the old unit as part of the replacement and take it away for recycling where possible.

    Every job

    What comes with hot water replacement from us

    Tools on the ute
    Drain camera and locator, electric drain machine, high-pressure jetter, thermal camera, acoustic leak gear, gas detector and pressure test kits
    Licences
    Victorian plumbing licences covering water supply, sanitary, drainage, roofing and gasfitting work
    Pricing
    A clear price agreed before work starts, and written quotes for bigger jobs. No call-centre surprises
    Materials
    WaterMark-certified products and fittings to Australian Standards
    Paperwork
    Compliance certificates lodged for regulated work, photos and notes for insurance where useful
    Clean-up
    Old parts taken away, floors and paths cleaned, the job tested with you before we go
    Why locals ring us

    Plain dealing, careful work

    A plumber who knows the town

    Weatherboards from the early 1900s, 1970s brick veneers, new homes on the edge of town and farmhouses on tank water: that is the mix we work on around Yarragon every week.

    A price before the work

    No surprises. The plumber diagnoses first and agrees the job and the price with you before picking up a tool.

    Find it, then fix it

    Drain cameras, thermal imaging and acoustic gear show us where the problem really is, so we are not digging up your yard on a guess.

    Licensed for the lot

    Water, sanitary, drainage, roofing and gasfitting work done by licensed plumbers, with compliance certificates where they are required.

    Service area

    Towns we cover from Yarragon

    We are based in Yarragon and work the Princes Highway towns either side, the hill country to the south and the farms out towards Shady Creek. If your place is not listed, ring 03 8658 7871 and ask.

    Need a plumber in Yarragon today?

    Talk to a licensed plumber, not a call centre. Quote first, then the work.